Engineer (Kuala Lumpur Technology Center)

• Provide refining process engineering expertise for ExxonMobil’s manufacturing facilities globally
• Drives functional excellence by promoting continuous improvement of standards, tools, and practices
• Provide mentorship to junior and advanced Process Engineers

• Degree in Engineering (any discipline)
• Preferably 15 years or more experience in a refinery
• Broad process technology experience in refining (Distillation, FCC, Coking, HDP/Reforming, Alky, Amines, Utilities)

• Provide chemical process engineering expertise for ExxonMobil’s manufacturing facilities globally
• Drives functional excellence by promoting continuous improvement of standards, tools, and practices
• Provide mentorship to junior and advanced Process Engineers

• Degree in Engineering (any discipline)
• Preferably 15 years or more experience in a chemical plant
• Broad process technology experience in chemicals (Olefins, Aromatics, Polyolefins, Resins, Specialties Chemicals)
• Experience in daily operations, unit optimization, troubleshooting, turnarounds and start-ups / shutdowns

• Provide process engineering support (troubleshooting, improvement opportunities, catalyst selection and turnaround) to ExxonMobil manufacturing sites
• Provide technical leadership, mentor and guidance to less experienced engineers
• Provide technical support to projects including installation, commissioning and operation of facilities

• Degree in Chemical engineering or equivalent
• Preferably 5 years of experience in oil and gas industry with experience in hydroprocessing, reforming, isomerization and / or hydrogen technology
• Experience in operations including monitoring, troubleshooting, projects, turnarounds and use of process models (such as PRO-II) or analytical tools (such as JMP) will be an added advantage

• Lead Supply Chain technology projects across multiple business lines and develop new business opportunities
• Provide creative technical input to resolve logistics and network modeling problems and to optimize Supply Chain R&D programs
• Take ownership of work on optimization technology development in collaboration with the technical leadership and management team

• Degree in Industrial / Chemical Engineering (Optimization, Operation Research, Applied Mathematics, Statistics or similar field)
• Working knowledge of Linear, Non-Linear, Mixed Integer Linear and Non-Linear programming and stochastic processes
• Experience with relevant software such as AIMMS, Supply Chain Guru, Gurobi and Simio is an added advantage

• Map compositional analytical data to a model of composition, and extend existing kinetic networks
• Fit kinetic parameters to experimental and/or commercial data, and apply and extend property and performance models
• Support embedding composition-based models into other work flows (e.g. online and offline manufacturing optimization and process monitoring)
• Support model use, configuration, debugging and updates

• PhD in Chemical Engineering (or in relevant fields)
• Experience in modeling kinetic networks is an added advantage

• Provide process engineering and technical support to:
  • capital projects in ensuring efficient use of capital
  • mentor and guide less experienced engineers and technical specialists
  • identify opportunities for improvements, research and effectively deploy new technologies
• Collaborate with vendors and suppliers to ensure appropriate design, manufacture, testing and delivery of equipment
• Support ExxonMobil manufacturing sites in downstream, chemical and upstream (site turnarounds and startup / shutdown, installation, commissioning and operation of grassroots or revamped facilities)

• Degree in Chemical Engineering
• At least 8 years of experience in oil and gas, petrochemical or refining industry
• At least 4 years of experience in Fluid Catalytic Cracking (FCC) / distillation / fractionation
• Working knowledge or experience in one or more of the following:
  • technical refining including monitoring, troubleshooting, asset support, projects and turnarounds
  • process and equipment design including use of process simulation packages
• Experience in R&D and pilot plant facilities will be an added advantage

• Provide technical guidance for heat exchanger design, operation, and troubleshooting across downstream and upstream facilities within the global ExxonMobil organisation
• Provide technical guidance for optimization, monitoring and reliability improvements across the global heat exchanger fleet
• Support heat exchanger selection and design for capital projects within the global ExxonMobil organisation

• Bachelor’s (or higher) degree in Mechanical or Chemical Engineering; Open to fresh graduates
• Effective communication and interpersonal skills to work well in a team environment
• Experience using HTRI programs for designing/analyzing heat exchangers would be a plus

Position title

• Provide engineering support for marine terminal (MT) facilities covering structure, fender & mooring, cargo transfer equipment and ship / shore access
• Complete marine terminal (MT) modeling and technical evaluations for berth / vessel compatibility. Develop strategies for marine structures and equipment to support facility operations
• Perform internal assessments to gauge site adherence to ExxonMobil and industry standards, support MT circuit-wide initiatives and incident recovery efforts

• Degree in Civil / Structural Engineering
• Minimum 3 years of working experience in  structural design and analysis and preferably for marine related facilities. 
• Preferably with working knowledge or experience in industry guidelines for marine terminals, mooring analysis and fender design

• Build technical decision-making process at chemical manufacturing sites, including using models for equipment performance and trend analysis
• Process monitoring of equipment such as distillation towers, heat exchangers, compressors and furnaces

• Degree in Chemical Engineering
• Knowledge or experience in process simulation tools such as PROII or HYSYS will be an advantage

• Build, maintain and improve fundamental process models and linear program models of steam cracking / refining units
• Develop, maintain, implement and improve ancillary toolsets such as reporting, results analysis and model validation tools across ExxonMobil sites to enable optimal selection of chemical feedstocks as well as key operating conditions

• Degree in Chemical Engineering
• Minimum 1 year of experience in the petrochemical or refining industry:
  • Process modeling practices
  • Off-line or on-line optimization models for large scale refining / chemicals optimization
  • ROMeo or PIMS modeling and optimization platforms

• Support ExxonMobil sites on:
  • air emissions estimation and dispersion modeling
  • fleet monitoring of water / wastewater treatment facilities
• Work with technology leads on site performance analysis / recommendations

• Degree in Chemical or Environmental Engineering
• Knowledge or experience in process simulation tools like PROII or HYSYS is an added advantage
• Fresh graduates are encouraged to apply

• Perform overpressure protection studies for ExxonMobil refineries, chemical plants and global projects
• Deliver innovative and risk-appropriate solutions for overpressure protection system, including relief device installation and flare
• Support ExxonMobil manufacturing site's overall risk management program for risk associated with safety relief

• Degree in Chemical Engineering
• Preferably 3 years of experience or more in oil and gas, petrochemical or refining industry
• Working knowledge or experience in flare modelling or process simulation tools such as Visual Flow, FlareNet, HYSYS or PROII will be an added advantage

• Advise operating sites on the management of process safety risks and hazards associated with processes, equipment and operations
• Conduct formal risk assessments/ Process Hazard Analyses to identify risks associated with site operations/ technologies
• Provide guidance and recommendations on the applicability and interpretation of both internal and external safety guidelines and standards

• Degree in Chemical Engineering
• Minimum 8 years of petrochemical/ refining (downstream) experience in one or more of the following areas: Safety, Operations and/or Engineering Design
• Working experience with hazard identification, risk analyses/ assessment and knowledge of industry codes relevant to process safety (e.g. ASME, NFPA)

• Provide engineering technical support and develop improvement solutions for furnaces, boilers, flares and thermal oxidizers
• Mentor junior engineers

• Degree in engineering, preferably in Chemical or Mechanical engineering
• More than 10 years of experience in supporting fired (combustion) equipment, either at an operating facility or through design work
• Demonstrated technical management and leadership capabilities

• Develop and implement basic regulatory and advanced control applications at ExxonMobil refineries and chemical facilities worldwide
• Develop and apply tools and techniques to improve the effectiveness of process control applications
• Provide global technical expertise to ExxonMobil refineries, chemicals and upstream facilities globally on base and advanced control applications and support for capital projects

• Degree in Chemical or Electrical Engineering
• At least 2-3 years of experience in designing and implementing effective control applications in downstream refining, petrochemical industry or upstream facilities
• Working knowledge in one or more of the following:
  • Distributed Control System (DCS) software and hardware platforms (Honeywell TDC/EPKS, Yokogawa, Emerson, Schneider, ABB etc.)
  • Model predictive control software (AspenTech DMC or similar platforms)
  • Programming languages (VB, Matlab, Python, SQL)
  • Data analytics and visualization (SeeQ, JMP, Tableau, Power BI)
  • Steady State and Dynamic Simulation Tools (HySys, Unisim, DynSim)

• Support process control systems' infrastructure (software/hardware) and advanced control applications for refineries and chemical plants
• Design and engineer computing infrastructure such as servers, operating systems and networks
• Integrate and deploy advanced control applications into the industrial control systems (ICS) environment

• Degree in Computer Science/IT or Electrical Engineering
• Experience with virtualization, containers, networking, Windows Server operating systems, PowerShell, Python
• Experience with software configuration, integration, testing and technical documentation